SOUND FILM SHOOTING - made EASY

The interface connects to the P.C. connector of any camera and to the stereo microphone input of any audio recorder.

It is powerd by 4 cheap LR44 batteries.

It provides a microphone plug to record the audio track to the right stereo track while writing the sync information to the left stereo track.

The red record gain control knob enables the user to make sync recordings even with consumer models that do not have separate gain controls for the left (sync) and the right (audio) channel.

When using the interface with such a recorder, the general gain must first be set in a way, that the audio is close to 0 dB. After setting the microphone gain this way, you press the test button of the interface, watch the dB indicator of your recorder and turn the red knob until the dB value comes close to 0 dB, too.

This camera interface is the best choice when having no special AV equippment for live sound recording, or when wanting to use modern technologies like MD, MP3, sound card capturing etc.

Note, that the audio signal will only be in mono; one of the stereo channels is used for the sync information!