SOUND FILM SHOOTING - made EASY

Input signals for syncing: 1000 Hz pulses with line level, 1000 Hz pulses directly from sound head or digital pulses with TTL/CMOS 5V level.

Operation modes: "free run": projector is disconnected from the unit and can be used for rewinding, loading etc.

"sync lock": projector will only run, when a valid sync signal is present. The projector will start and stop remotely according to the sync signal, while being smoothly regulated to the clock of the sync signal.

"record": projector runs without sync regulation. 1000 Hz pulses are recorded to a tape in the clock of the projector frame rate.

Pulse ratio selector: Bauer projectors provide 12 pulses per frame, Braun projectors provide 3 pulses per frame and other sync devices provide 1 pulse per frame. This selector lets you set the synchronizer to all of them.

"manual" selector: in case you recognize a sync shift during sync projection, maybe due to a defect perforation, you can accelerate or slow down the projector until the audio is in sync again.

"reset" button: resets the internal sync shift memory. Should be pressed before starting a new sync process. Should not be pressed when only interrupting a running sync process by stopping the audio.

open for a lot of connections:

power supply with your country specific power adaptor with 8...12 V / 0,5 A output, DC or AC.

SYNC IN digital: Any TTL or CMOS 5V compatible sync signal can be connected.

TAPE/LINE: input for 1000 Hz signals with line level or direct sound head connection. Recording output when mode selector is in record position.

SYNC OUT digital: outputs the master signal as a clean TTL / CMOS 5V compatible signal. Can be used to connect external frame counters or the Elmo GS1200MO projector.

PROJECTOR socket: special connection for Bauer StudioClass and Braun Visacustic projectors. Combines pulse input and regulation output.

CONTROL: Universal regulation output and pulse input for the connection of tape decks and film editors or customer applications. Provides the 5 regulation levels using open collector outputs.